注: 建议图片大小150px*50px 
丨
English
注: 建议图片大小150px*50px 
 |
| Quantity: | |
|---|---|
MCH ceramic heating component is a highly efficient environmental protection and energy saving ceramic heating components, mainly to replace now the most widely used alloy wire electronic components and PTC heating electric heating element and component.
Features:
1) Rapid temperature rise, 10 seconds up to the rated 100ºC~230ºC; 30 seconds up to 500ºC~700ºC
2) High thermal efficiency, energy saving, no pollution, in line with environmental requirements.
3) Uniform heat, no open fire, safe to use
4) The heater is in the vacuum state, and the heater is resistant to acid, alkali and harmful gases.
5) Long service life and small power attenuation.
Usage:
Our ceramic heaters can operate in atmospheric and vacuum environment. MCH technology offers significant advantages over metal basic sheath heaters,while the latter has limitations in thermal performance and material compatibility. Compared with PTC, MCH is more energy saving, safer and higher efficient. MCH is widely used as innovative heater in machinery, medical, semiconductor, electronic & electrical industries,etc.
| Item | Test condition | Unit | Property |
| color | / | white, compact | |
| Main materials | / | ≥96% Al2O3 | |
| Density | g/cm3 | >3.7 | |
| Camber | mm | <0.2 | |
| Leads tension strength | kg | horizontal pull ≥2 | |
| Flexure strength | Mpa | >300 | |
| Hardness | Load 4.9 | Gpa | ≥15 |
| Thermal conductivity | 25±1ºC | W/(mk) | ≥20 |
| Withstand voltage strength | 25±1ºC,4200v/s | / | Leakage current <0.62mA |
| Insulation resistance | DC=500V | MΩ | >100 |
| Resistance tolerance | 25±1ºC | Ω | Middle value ±10% |
| Coefficient of linear expansion | (40-800ºC) | / | 7.5*10-6/ºC |
MCH ceramic heating component is a highly efficient environmental protection and energy saving ceramic heating components, mainly to replace now the most widely used alloy wire electronic components and PTC heating electric heating element and component.
Features:
1) Rapid temperature rise, 10 seconds up to the rated 100ºC~230ºC; 30 seconds up to 500ºC~700ºC
2) High thermal efficiency, energy saving, no pollution, in line with environmental requirements.
3) Uniform heat, no open fire, safe to use
4) The heater is in the vacuum state, and the heater is resistant to acid, alkali and harmful gases.
5) Long service life and small power attenuation.
Usage:
Our ceramic heaters can operate in atmospheric and vacuum environment. MCH technology offers significant advantages over metal basic sheath heaters,while the latter has limitations in thermal performance and material compatibility. Compared with PTC, MCH is more energy saving, safer and higher efficient. MCH is widely used as innovative heater in machinery, medical, semiconductor, electronic & electrical industries,etc.
| Item | Test condition | Unit | Property |
| color | / | white, compact | |
| Main materials | / | ≥96% Al2O3 | |
| Density | g/cm3 | >3.7 | |
| Camber | mm | <0.2 | |
| Leads tension strength | kg | horizontal pull ≥2 | |
| Flexure strength | Mpa | >300 | |
| Hardness | Load 4.9 | Gpa | ≥15 |
| Thermal conductivity | 25±1ºC | W/(mk) | ≥20 |
| Withstand voltage strength | 25±1ºC,4200v/s | / | Leakage current <0.62mA |
| Insulation resistance | DC=500V | MΩ | >100 |
| Resistance tolerance | 25±1ºC | Ω | Middle value ±10% |
| Coefficient of linear expansion | (40-800ºC) | / | 7.5*10-6/ºC |
